WHAT YOU NEED:

- Firmware Modified Xbox 360

- 0800 Flashed BenQ/Liteon Drive connected to your PC

- IHAS liteon Burner Flashed with BURNER MAX firmware

- Xbox Backup Creator

- IMGBurn

- ABGX360

HOW TO DO IT (RIPPING):

1.) Place Original Game into your 0800 Drive

2.) Start Xbox Backup Creator

3.) Select the "Options" tab

4.) Uncheck "Process AP25" under the Read section.

5.) Select the 'Read' Tab at the top

6.) Select your 0800 in the drop down menu at the top

7.) Click Start and select your save destination. Let Xbox Backup Creator do its thing

HOW TO DO IT (VERIFYING):

1.) Start Abgx360

2.) Select "AutoFix" tab

3.) Select "Autofix Threshold" to Level 3

4.) Control + S to save your new settings

5.) Load ISO at the top in the "Input" Section

6.) Click "Launch" right at the bottom

7.) Let ABGX360 do its thing.

HOW TO DO IT (BURNING):

1.) Place Blank Verbatim Dual Layer DVD into your Liteon IHAS Pre-flashed Burner

2.) Start IMGBurn

3.) Select the "Write Image file to disc"

4.) Select your Original game image that was previoulsy ripped to your PC

5.) Ensure your liteon IHAS burner is selected in the Destination section

6.) Recommended Speed Settings for Verbatim media:

MKM-001-00 discs (rated at 2.4X) - Burn at 2.4X.

MKM-003-00 discs (rated at 8X) - Burn at 2.4X, or at 4X with OPC turned on in ImgBurn (Tools - Settings... - Write (tab) - Place check mark next to "Perform OPC Before Write").

7.) Verifying your Burn is always a good idea if you're not in a rush.

8.) Click Burn!

Drive Identification (Fat Xbox 360):

DISASSEMBLE XBOX 360:

WHAT YOU NEED:

- Xbox 360 and Controller

METHODS FOR JTAGGING:

There are currently 2 ways to jtag and Xbox 360.

Method #1:

- Works only on Fat Xbox 360s that haven't been updated past dashboard 2.0.7371.

Method #2:

- Works on most Fat model Xbox 360's except for the Xenon Model (The First models that don't have HDMI output)

- Works on most Slim model Xbox 360's except for the new motherboard revision

HOW DO I CHECK MY DASHBOARD VERSION:

1.) Navigate to System Settings, Click A

2.) Navigate to "Console Settings", Click A

3.) Navigate to "System Information", Don't click A

4.) Current Dashboard Version will be displayed in the top right corner

WHAT YOU NEED:

- Jtagged Xbox 360

- Home Router Setup (Wired or Wireless) <-- Wired is WAYYYY faster

- Exiso-gui v1.0.0.7

- Backed up Game Image ISO file

EXTRACT YOUR ISO:

1.) Plug Ethernet cable into your Jtag and boot system up

2.) Write down the local IP address from the bottom left hand corner of the screen. It should be something like: 192.168.X.XXX

3.) Open up the ExISO program GUI interface on your PC

4.) Select the FTP tab at the top

5.) Input your Xbox 360's IP address at the top. Port should be 21, Login and PW should be lowercase "xbox"

6.) Click the connection button on the right

7.) On the left you should see all your storable space. We will be storing on the internal hard drive for this example, but the same rules apply if storing on an external USB hard drive.

8.) Switch to the "E-xiso" tab

9.) Destination path should be "/Hdd1/Games"

10.) Select "Add an ISO" to add a single ISO or "Load a folder...." for multiple ISOs

11.) Hit GO! at the bottom.